In brief
A ring group, in the most common usage, rings several phones at the same time, and the first person to pick up gets the call. A hunt group rings phones one after another in a set order until someone answers. Many phone systems use "ring group" for both and let you choose the ring strategy: simultaneous, sequential, round robin, or longest idle.
Simultaneous ring gets a caller to a person fastest when anyone on the team can help. Sequential ring makes sense when one person should answer first and others are backup. Either way, decide in advance what happens when nobody answers, because that is where calls are lost.
The terms, and why they get confusing
Vendors do not use the same words. Some call any group of phones a "ring group" and treat the order as a setting. Others reserve "hunt group" for sequential ringing, a term that comes from older office phone systems where the switch "hunted" for a free line.
Microsoft's documentation for Teams call queues is a useful neutral reference, because it names each method plainly. In Set up a call queue, Microsoft describes four routing methods:
- Attendant routing rings everyone in the queue at the same time. The first person to pick up gets the call.
- Serial routing rings people one by one in the order listed. If someone does not pick up, the next person rings.
- Round robin balances calls so each person gets about the same number.
- Longest idle sends the call to the person who has been available the longest.
When a vendor says "ring group," check which of these it actually does. The behavior matters more than the name.
Simultaneous ring
Every phone in the group rings at once. The first person to answer takes the call, and the other phones stop ringing.
Good fits:
- A front desk or office line where any of three or four people can take a message or book an appointment
- A sales line where speed matters more than who answers
- Small teams where everyone shares the same job
Watch for:
- Everyone assumes someone else will get it. In a busy room, a phone that rings on four desks can go unanswered for longer than one that rings on one desk. Make one person the primary answerer during set hours, even if the group still rings.
- Interruptions. Every call rings every phone. For a team doing focused work, that adds up.
- Cell phones in the group. If a member's cell phone is in the group and that phone sends unanswered calls to its own voicemail quickly, the mobile voicemail can pick up the group call before anyone at a desk does. Many systems offer a setting that asks the person to press a key to accept, which stops a voicemail box from taking the call. Turn it on if any member uses a cell phone.
Sequential ring (hunt group)
The call rings the first person for a set time. If they do not answer, it moves to the second, then the third.
Good fits:
- A receptionist who should answer first, with an office manager and an owner as backup
- Specialist lines where one person handles a type of call best
- After-hours on-call lists, where the person on call rings first and a supervisor rings second
Watch for wait time. Sequential ring adds up quickly. Microsoft recommends an agent alert time of at least 20 seconds per person in a Teams call queue. At 20 seconds each, a four-person sequence takes 80 seconds before the last person even starts ringing. That is a long time to listen to ringing.
A simple way to size a sequence: decide the longest a caller should hear ringing, then divide by the ring time per person. If the answer is 60 seconds and each phone rings for 20, the sequence has room for three people. Anyone after the third should be reached a different way, such as a second group or a message.
Round robin and longest idle
These are variations used mostly by teams that take many calls, like support or dispatch.
Round robin spreads calls evenly, which is fair when people are paid or measured on volume. It does not know who is busy unless the system tracks availability.
Longest idle sends each call to whoever has been free the longest. In Teams, a person counts as idle when their presence is Available. Microsoft lists round robin and longest idle as the recommended routing settings for call queues.
Neither is usually needed for an office with a handful of people. They start to matter when the same group answers dozens of calls an hour.
Choosing for your business
A few common setups:
| Situation | Usually works |
|---|---|
| Front office, 2 to 4 people who all do the same job | Simultaneous ring, with one person primary during set hours |
| Receptionist, then backup | Sequential: receptionist first, then one or two backups |
| Sales line with several reps | Simultaneous, or round robin if leads are shared evenly |
| Service team taking many calls an hour | Longest idle or round robin, with availability tracking |
| After hours | Sequential: on-call person, then supervisor |
Schedules change the answer. A business might ring the whole office at once on weekdays, ring only the owner on Saturday, and send Sunday calls straight to a message. A routing system that lets each day have its own group handles this without anyone changing settings by hand on Friday afternoon.
Decide what happens when nobody answers
Every group needs an end. The common choices are:
- Voicemail. A shared box someone actually checks, with a clear owner for returning calls.
- Another group. For example, the office rings first, then the field supervisor's phone.
- A recorded message with hours and another way to reach you, such as a website form or email.
- An answering step that greets the caller and takes their details.
Two settings decide how this works in practice:
- The total ring time before the call moves to the final step. Keep it short enough that callers stay on the line.
- What the final step says. A greeting that names the business and says when the caller will hear back is more useful than a default system message.
How to test a new setup
Call the number from an outside phone, not an internal extension, and check each case:
- During business hours with everyone available
- With the first person in a sequence not answering
- With nobody answering, to hear the final step
- From a cell phone in the group with its own voicemail on
- After hours and on a weekend day, if those have different routes
Write down what each call did. Repeat the test after any staffing change.
Atlas Voice lets you set a different ring group for each day and choose what answers when no one picks up.
FAQ
What is the difference between a ring group and a hunt group?
A ring group usually rings all its phones at the same time. A hunt group rings them one after another in order. Many systems use "ring group" for both and let you pick the ring strategy.
Which is better, simultaneous or sequential ring?
Simultaneous gets callers to a person faster when anyone can help. Sequential is better when one person should answer first. Many businesses use both at different times of day.
How long should each phone ring in a hunt group?
Microsoft recommends at least 20 seconds per person in a Teams call queue. Keep the total sequence short enough that callers do not hang up, which in practice limits how many people a sequence can include.
Can a cell phone be part of a ring group?
Yes, on most systems. Turn on any "press a key to accept" option, so the cell phone's voicemail does not answer the group call.
What should happen if no one in the group answers?
Send the call to a voicemail someone checks, another group, or a message that gives your hours and another way to reach you.